Đồng hồ đo lỗ điện tử dòng 468 Mitutoyo
Hệ mét
|
Mã đặt hàng
|
Range*2 (mm)
|
Độ chia (mm)
|
Maximum permissible error
JMPE (µm)*1 |
Phụ kiện tùy chọn | |
| Extension rod | SPC cable | ||||
| 468-161 | 6 - 8 |
0.001
|
±2 (maximum difference 2)
|
952322
(100 mm) |
05CZA662
(1 m) 05CZA663 (2 m) |
| 468-162 | 8 - 10 | ||||
| 468-163 | 10 - 12 | ||||
| 468-164 | 12 - 16 |
±3 (maximum difference 3)
|
952621
(150 mm) |
||
| 468-165 | 16 - 20 | ||||
| 468-166 | 20 - 25 |
952622
(150 mm) |
|||
| 468-167 | 25 - 30 | ||||
| 468-168 | 30 - 40 | ||||
| 468-169 | 40 - 50 | ||||
| 468-170 | 50 - 63 |
952623
(150 mm) |
|||
| 468-171 | 62 - 75 |
±4 (maximum difference 4)
|
|||
| 468-172 | 75 - 88 | ||||
| 468-173 | 87 - 100 | ||||
| 468-174 | 100 - 125 |
±5 (maximum difference 5)
|
|||
| 468-175 | 125 - 150 | ||||
| 468-176 | 150 - 175 | ||||
| 468-177 | 175 - 200 | ||||
| 468-178 | 200 - 225 |
±6 (maximum difference 6)
|
|||
| 468-179 | 225 - 250 | ||||
| 468-180 | 250 - 275 | ||||
| 468-181 | 275 - 300 | ||||
Hệ inch/ mét
|
Mã đặt hàng
|
Dải đo (in)
|
Độ chia |
Maximum permissible error
JMPE (in)*1 |
Phụ kiện tùy chọn | |
| Extension rod | SPC cable | ||||
| 468-261 | 0.275 - 0.35 |
0.00005 in/
0.001 mm |
±0.0001
(maximum difference 0.0001) |
952322
(100 mm) |
05CZA662
(1 m) 05CZA663 (2 m) |
| 468-262 | 0.35 - 0.425 | ||||
| 468-263 | 0.425 - 0.5 | ||||
| 468-264 | 0.5 - 0.65 |
±0.00015
(maximum difference 0.00015) |
952621
(150 mm) |
||
| 468-265 | 0.65 - 0.8 | ||||
| 468-266 | 0.8 - 1 |
952622
(150 mm) |
|||
| 468-267 | 1 - 1.2 | ||||
| 468-268 | 1.2 - 1.6 | ||||
| 468-269 | 1.6 - 2 | ||||
| 468-270 | 2 - 2.5 |
952623
(150 mm) |
|||
| 468-271 | 2.5 - 3 |
±0.0002
(maximum difference 0.0002) |
|||
| 468-272 | 3 - 3.5 | ||||
| 468-273 | 3.5 - 4 | ||||
| 468-274 | 4 - 5 |
0.0001 in/
0.001 mm |
±0.00025
(maximum difference 0.00025) |
||
| 468-275 | 5 - 6 | ||||
| 468-276 | 6 - 7 | ||||
| 468-277 | 7 - 8 | ||||
| 468-278 | 8 - 9 |
±0.0003
(maximum difference 0.0003) |
|||
| 468-279 | 9 - 10 | ||||
| 468-280 | 10 - 11 | ||||
| 468-281 | 11 - 12 | ||||
*1 Additionally, the difference in permissible error allowable is limited to a value within this range, as given in parentheses, and is measured with the entire measuring surface in contact with the object measured.
*2 The measurement range cannot be enlarged by measuring heads that are not standard-supplied (the accuracy is not guaranteed). Note: Setting rings are optional.